Product Introduction
Telescopic boom is a kind of working device mounted on the digging end of backhoe loader, which is made of fixed body and mobile body through the action of telescopic cylinder to make the mobile body extend and retract, so as to achieve a larger digging radius and reasonable loading height.
Working Principle
The telescopic boom is a kind of working device installed on the digging end of the backhoe loader, which is made of fixed body and mobile body through the action of telescopic cylinder to make the mobile body extend and retract, so as to achieve a larger digging radius and a reasonable loading height. Through the action of telescopic cylinder and slider, the mobile body "slides" on the fixed body, so this is called sliding telescopic boom. Its main components are: fixed body, mobile body, slider, telescopic cylinder and so on. This form of telescopic arm has the advantages of large force, simple structure, low production cost. The slider arm can be used back to backhoe loader original bucket cylinder, connecting rod assembly, pin and some other accessories. Within the limited travel, the backhoe loader installation of the slide arm is not required to increase the rear counterweight.
Product features
1. Large effective working distance and high working height. Through the telescopic boom structure can reach the purpose of a longer distance, through the arm of the amplitude can reach a higher operating height, which is the standard excavator arm can not be compared.
2. It can directly load and unload goods over some obstacles. Using telescopic arm device can cross the small ditch, steps, door and window holes for loading and unloading operations; due to the negative angle of amplitude, can also be on the parking surface of the ditch ditch clearing or repair broken, leveling and other operations, and thus more suitable for use in the field conditions.
3. With better operational safety performance. The telescopic boom backhoe loader has the function of load expansion and contraction, when stacking operation is carried out on the uneven road surface, it can stop at the position far away from the stacking point, open the stabilizing legs, and use the expansion and contraction and amplitude change action to complete the loading and unloading operation of the goods.
4. Easy to replace a variety of attachments to expand the operating range.
Hot Tags: homemade sliding telescopic arm, China homemade sliding telescopic arm manufacturers, factory